DeWalt DWE7491RS vs Bosch 4100-09: Which is Better for You?

DeWalt DWE7491RS vs Bosch 4100-09

DeWalt DWE7491RS vs Bosch 4100-09, A table saw is the most significant tool that any carpenter or DIY-er may boast. Acquiring a portable table saw is essential as it is the most basic electrical saw. But, with such a market as the one that we have today, there are so many features to look at while making the purchase as to confuse the untrained eye. When looking for a table saw, you want to look for motor, horsepower, portability, versatility, safety, and of course, price. In this article, it is all about DeWalt DWE7491RS vs Bosch 4100-09. we will discuss them in order to conclude which of them will be best suited to you. Now, you may ask yourself why have we chosen these two rather than other models that you may have read about. Well, these two happen to be, at the very moment, the most common table saws on the market. Although many people would claim they are one and the same, today we will highlight all the differences between them. Both companies have released lines and lines of models that have captured the attention of users for a long time, and these two models are no different

DeWalt DWE7491RS vs Bosch 4100-09 Quick Overview

Model

Price

Weight

Motor

Speed

Editor Rating

DeWalt DWE7491RS - Toolspros
DeWalt DWE7491RS

110 pounds

15 amp

4800 RPM

4.7 out of 5 stars

Bosch 4100-09

124.2 pounds

15 amp

3650 RPM

4.6 out of 5 stars

DeWalt DWE7491RS vs Bosch 4100-09 Overview

DeWalt DWE7491RS Overview

DeWalt is one of the pioneer companies in the world of carpentry. There is not a tool that you might need that they won’t be offering you. With this model, however, they have excelled. The Dewalt runs a 15 amp motor with a speed of 4800 RPM, which can go through vigorous work and come out victorious on the other side. It can easily go through 3/4″ plywood, 2x framing material, and 1x Maple. It is very steady and durable; it will hardly ever let you down.

Bosch 4100-09 Overview

The Bosch brand has been around for so long, and when you hear such a name, you usually expect quality, power, and durability. This model, however, has played on several other key features that portable table saws should have. One of them is that with a 15 amp motor and a speed of 3650 RPM, it’s able to cut through countless materials quite easily. It can weave its way through pine and plywood with elative ease. Go ahead and work through 4 feet sheet goods with relative ease or go to the other side of the rainbow and do all the detailed work that you need on an intricate piece. 

DeWalt DWE7491RS vs Bosch 4100-09 - Full Comparison

What You Get?

DeWalt DWE791RS offers you the Jobsite table saw, a 10-inch 24-tooth blade, a rolling stand, a push stick, and a miter gauge, all included in its box. We’ll be discussing all of these as we progress.

Bosch 4100-09, however, gives you, of course, the Jobsite table saw, GTA47W Gravity-Rise wheeled table saw stand, Smart-Guard System - Barrier-Guard Device and Anti-Kickback Pawls, 10-inch blade, SquareLock rip fence, a miter gauge, a push stick, a throat-plate insert, a multi-function blade wrench, and an adjustment wrench.

Portability

DeWalt DWE791RS: If you start with the Bosch, you might find the DeWalt a bit lacking in this aspect. Although it is designed to be portable, along with its case, it weighs 110 pounds, making it a little bit hard to shift around from the workshop to the truck to the job site and vice versa. The one thing that the DeWalt offers here is the treaded wheels meaning that it will go through any environment while keeping its stability and maintaining your saw perfectly.

Bosch 4100-09: Truly does stand out with a lightweight of around 58 pounds and an overall weight, with all the other accessories, of approximately 92 pounds, it is one of the most portable table saws out there. Indeed it is the essence of portability; you can move it around; however, you want, but Bosch doesn't stop there. 

It has also given this model the gravity rise stand, which allows it to be folded and unfolded single-handedly using one lever as it rises by itself and folds by itself without extra effort from you. When it is folded, it can be wheeled around on two wheels.

Circuitry

DeWalt DWE791RS: With the heaviness of the DeWalt and it being such a sturdy tool, it might take a minute to reach full power. Although the circuitry on this device is not at fault,  it is also not something to be celebrated, it is the very norm of any electrical table saw that you’ve ever seen.

Bosch 4100-09: Here, however, with a light device and 4860 RPM, the circuitry is absolutely excellent. As widely used as the device is, there have never been any reports of broken circuits or delayed startups. The device ramps up to its full speed beautifully.

Blades

DeWalt DWE791RS: Here, this is the winning point for the DeWalt as it comes with a 10-inch carbide-tipped 24 teeth blade. We have already said before that it will cut through anything, but the thing about it is that it would also help you in doing intricately detailed work on your wood piece. So, it’s not just a blade for major ripping; it may also help you with the decor aspect of your project.

Bosch 4100-09: Although one can hardly find fault with the blade of the Bosch, it is a standard 10-inch ATB blade with 24 teeth. And, as said before, it will go through softwoods like a knife through butter, but it may face some difficulty or require extra effort while going through harder materials.

Dado Stack

There’s not a major difference in this category as both the devices will accept a dado stack up to the size 13/16 inch. However, each one of them has its own as the Dewalt would need a dada with a throat-plate, and the Bosch will need it’s very own dado insert. The thing is with the Bosch you get it already included in the box while with a DeWalt you’ll have to purchase it separately

Rip Fence

DeWalt DWE791RS: The fencing system here is pretty unique as it has rails both at the front and the back of the saw. This eliminates any possibility of drift and expands the ripping capacity, allowing you to work with larger projects. It is very sturdy, durable, and overall fitting the general air of the Dewalt.

Bosch 4100-09: The square-lock fence is an amazing system. It is advanced, and it allows you to finish all of your clamping business quite neatly so that you will be assured of clean straight cuts. However, the only downside comes from wear and tear as it is manufactured from plastic; this means that it might very well break easy. Other than that, it has all the features that every fencing system ought to have; it folds, stores, and expands as neatly as ever. 

Miter Gauge

Speaking about Miter Gauges, there is not a fundamental difference between the two devices. Both will get the job done, they are fine to work with, but they are not top of the line. They both lack a T-tracking system, which would allow you to make really wide angle cuts. 

But, they are there, they are easy to use, and there have been no reports of them forming a difficulty for users. However, the Bosch may be a little bit more vulnerable than the DeWalt, and we can blame that on the fact that the DeWalt is, primarily, sturdier than the Bosch.

Horsepower

DeWalt DWE791RS: DeWalt here has the same motor as the Bosch of 15amp. However, it has a higher speed of 4850 RPM, which perfectly complements the horsepower of 2HP that it has. These three features together give you an excellent cutting experience.

Bosch 4100-09:  Although the Bosch has the same motor of the Dewalt, it works at a lower speed of 3650 RPM. However, this is subsidized by a horsepower that is not seen so commonly in portable table saws which is 4HP. Also check comparison of Dewalt DWS779 VS DWS780.

Rip Capacity

DeWalt DWE791RS: Of course, the DeWalt focused on the essence of every table saw, which is the ripping capacity. It gives you a whopping 32.5 inch when extended; this will allow you to work on large-scale projects with relative ease.

Bosch 4100-09: The Bosch, however, being smaller and lighter offers you a ripping capacity of only 25 inches when extended. Of course, 25 inches is not bad, but it is also not the best. Sometimes your projects might need a bigger ripping capacity than just 25.

Nevertheless, they can both cut 90° and 45° angles; the 90° can be cut; it’s 3 1/8 inch while the 45° can be cut at 2 1/2 inch.

Safety

DeWalt DWE791RS: Another new system that has been applied to the DeWalt is the Smart-Guard System; it includes a riving knife, anti-kickback pawls, and an overall focus on safety. 

It also includes a Power-Loss-Reset, which means that if for any reason power is lost from the device and then comes back, the device will not power on. It will not revert to the setting that was applied to it before. 

There is a large green button with the word ‘’ON’’ on it that you have to press in order for the device to power up again. Nevertheless, to protect you, your kids, and your pets from pushing the button by accident, it is protected by a flip over plastic cover.

Bosch 4100-09: The Bosch is also blessed with the same Smart-Guard System, including the same anti-kickback pawls and the same riving knife. However, it has been said that Bosch has focused more on its safety measures being easier to use and more appealing to the clients with this model in order to encourage people to make the most out of the safety measures that they have.

Another thing that has been added to the Bosch is the Arbor-Lock, which facilitates the blade changing process. Another plus is the integrated carry handles, which means that you have a designed place from which you can carry your saw.

One last way in which Bosch has looked out for its clients is that it has installed a little plastic extension that pops out whenever the extension rail is not locked in properly, which will, of course, prevent a lot of undesirable accidents. Also check comparison of 10-Inch vs 12-Inch Miter Saw

DeWalt DWE7491RS vs Bosch 4100-09 - Table & Dimensions

DeWalt DWE791RS 

Device: 31 x 24.5 x 31 inches

Table: 21-7/8 X 26 - ⅜

This is a stainless steel table which lies completely flat providing you with complete stability and precision with your work

Bosch 4100-09

Device: 29.4 x 21.5 x 29 inches

Table : 26 ¼ x 22 inches

Aluminum is the winner here as it provides the user with a very sturdy and extremely smooth surface to work on. One more thing is that it is even coated to enhance its smoothness.

Dust Clean-Up

DeWalt DWE791RS: This guy here is equipped with not one but two dust ports, one of them measuring 2.58 inches while the other measures 1.5 inches. They are both placed strategically close to the blade guard. Simply, all you have to do is to connect your vacuum dust collection system and not have to bother yourself with the tedious process of cleaning up. The two ports here, of course, give DeWalt a decided advantage over many of its peers; it does double the work.

Bosch 4100-09: The Bosch, of course, does have a dust control port; however, it is singular, and it measures only 2 inches. It is placed underneath the aluminum table, and although there is nothing that you can call out here, a single port might not be enough for all of the sawdust that’s going to be produced from such large-scale projects.

Power Source

DeWalt DWE791RS: Corded Electric.

Bosch 4100-09: Corded Electric.

DeWalt DWE7491RS vs Bosch 4100-09 - Price Vs Value

DeWalt DWE791RS: This device now ranges around five hundred to six hundred dollars. For the sturdiness, the ripping capacity, safety, and the Rolling Stand system, one would say that you would get the value for your money. This model is chock-full of advantages and features that every carpenter/DIY-er may need, so you are certainly not wasting your money here.

Bosch 4100-09: If you need a table saw that’s on the cheaper side, then the Bosch is definitely the one for you. It gives you a multitude of advantages; there’s nothing that you might need that you will not find with it. Perhaps the slight difference in price is due to the fact that the Bosch is a little bit lighter as some materials used with it are not as expensive as the materials used in manufacturing the DeWalt. However, it is still a paragon of portability.

DeWalt DWE7491RS vs Bosch 4100-09 - Pros & Cons

DeWalt DWE791RS:

Pros

  • Dual dust control system
  • Three years limited warranty
  • Highest rated capacity
  • High durability
  • Rolling-Stand attachment
  • Treaded heavy-duty wheels
  • Flipped-over ripping fence

Cons

  • Noisy
  • Heavy 
  • Dedo plates purchased separately 
  • Very basic Miter gauge 
  • Large Frame

Bosch 4100-09:

Pros

  • Very light 
  • Better safety options
  • Easy transportation
  • One year unlimited warranty

Cons

  • Some materials used to make it can be cheap
  • Less durable
  • Less rip capacity 
  • Very basic Miter Gauge
  • Single dust control ports

Final Thoughts

Now looking at all of these features, advantages, and disadvantages, it’s really hard to say that one of them is absolutely better than the other. They are very similar in a lot of aspects and very different in others. However, if we are to pick an absolute favorite, it will have to be the Bosch 4100-09 as portability and lightweight are two advantages that simply cannot be looked over. Just think about moving around your worksite while pulling 110 pounds behind you. This is an absolute nightmare for a lot of people.  However, with Bosch, you are dragging around 52 pounds which is, in truth, not much at all.